28 Replies Latest reply: Apr 4, 2014 7:54 AM by URADHAKRISHNAN RSS

Snap creator scServer4.1.0c version failing for 7 mode filers.

URADHAKRISHNAN Sprinter
Currently Being Moderated

Snap creator scServer4.1.0c version failing for 7 mode filers. This is working as expected for C mode filers. Here is the error i get.

 

 

[2013-12-09 02:49:14,618] ERROR: STORAGE-03033: Getting system version details of [qyfiler092a] failed with error [netapp.manage.NaAuthenticationException: Authorization failed]

[2013-12-09 02:50:47,301] ERROR: STORAGE-03029: No SnapVault relationships found. Check your configuration for [qyfiler092a], Exiting!

[2013-12-09 02:54:58,270] ERROR: SCF-00019: SnapVault relationship for [qyfiler092a]:[unni_test] does not exist, Exiting!

[2013-12-09 02:56:27,354] ERROR: SCF-00019: SnapVault relationship for [qyfiler092a]:[unni_test] does not exist, Exiting!

[2013-12-09 02:57:31,968] ERROR: Task: storageDiscovery with config:frmsprf@frmsprf failed

 

Here is the relation i have

 

[root@qycprdoc01 ~]# ssh qyfiler092a snapvault status

Snapvault is ON.

Source                           Destination                         State          Lag        Status

qyfiler092a:/vol/unni_test/test  qyfiler053a:/vol/sv_unni_test/test  Source         547:18:20  Idle

[root@qycprdoc01 ~]#

 

 

here are the main options in config i am using

 

 

 

 

CONFIG_TYPE=STANDARD

VOLUMES=qyfiler092a:unni_test

META_DATA_VOLUME=

LOG_NUM=30

SNAPDRIVE=N

SNAPDRIVE_DISCOVERY=N

LOG_TRACE_ENABLE=N

NTAP_PWD_PROTECTION=Y

USE_PROXY=N

NTAP_TIMEOUT=60

USE_GLOBAL_CONFIG=N

FEDERATED_APPLICATIONS=

ALLOW_IP_ADDR=Y

SC_TMP_DIR=

 

 

########################################################################################################################

#     Connection Options                                                                                               #

########################################################################################################################

NTAP_USERS=qyfiler092a:screator/xxxx;qyfiler053a:screator/xxxxx

MANAGEMENT_INTERFACES=qyfiler092a:qyfiler092a.corp.intuit.net;qyfiler053a:qyfiler053a.corp.intuit.net

PORT=80

TRANSPORT=HTTP

SECONDARY_INTERFACES=qyfiler092a:qyfiler092ar/qyfiler053ar

 

 

########################################################################################################################

#     SnapVault Options                                                                                                #

########################################################################################################################

NTAP_SNAPVAULT_UPDATE=Y

SNAPVAULT_QTREE_INCLUDE=

NTAP_SNAPVAULT_NODELETE=N

NTAP_SNAPVAULT_RESTORE_WAIT=N

NTAP_SNAPVAULT_RETENTION_AGE=35

NTAP_SNAPVAULT_SNAPSHOT=N

NTAP_SNAPVAULT_MAX_TRANSFER=

NTAP_SNAPVAULT_WAIT=120

NTAP_SNAPVAULT_RETENTIONS=DAILY:35

SNAPVAULT_VOLUMES=qyfiler092a:unni_test

  • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
    Siva Ramanathan NetApp Employee Kart Racer
    Currently Being Moderated

    Hello Unnikrishnan,

    I see a login issue from the logs.

     

    [2013-12-09 02:49:14,618] ERROR: STORAGE-03033: Getting system version details of [qyfiler092a] failed with error [netapp.manage.NaAuthenticationException: Authorization failed]

     

    Are you sure of the password that is used in the config file?

    NTAP_USERS=qyfiler092a:screator/xxxx;qyfiler053a:screator/xxxxx


    Is this an encrypted password?

    Your config has NTAP_PWD_PROTECTION=Y - this will need the password used in the config files to be encrypted.

    • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
      URADHAKRISHNAN Sprinter
      Currently Being Moderated

      Siva,

       

      Thanks for your reply.

      Login is not the issue. Snapvault relations is not being detected. please let me know if you have any suggestions.

       

      -----

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-02111: Retrieving SnapVault status on controller [qyfiler053a] finished successfully.

      [Thu Jan 2 07:06:19 2014] ERROR: SCF-00019: SnapVault relationship for [qyfiler092a]:[unni_test] does not exist, Exiting!

      [Thu Jan  2 07:06:22 2014] ERROR: Task: storageDiscovery with config:frmsprf@frmsprf failed

      [Thu Jan 2 07:06:19 2014] INFO: Application not defined. Skipping cleanup task

      -----

       

      Full log

       

       

      [Thu Jan 2 07:06:17 2014] INFO: Validating policy: daily finished successfully

       

       

      ########## Detecting Data ONTAP mode for qyfiler092a ##########

      [Thu Jan 2 07:06:17 2014] INFO: Management interface for qyfiler092a detected, using qyfiler092a.corp.intuit.net for communications

      [Thu Jan 2 07:06:17 2014] INFO: Secondary interface for qyfiler092a detected, using primary interface controller : qyfiler092ar Secondary interface controller :  qyfiler053ar

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-03031: Getting system version details of [qyfiler053a]

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-03032: Getting system version details of [qyfiler053a] finished successfully.

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-03031: Getting system version details of [psxnqycfd1cl01]

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-03032: Getting system version details of [psxnqycfd1cl01] finished successfully.

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-03031: Getting system version details of [qyfiler092a]

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-03032: Getting system version details of [qyfiler092a] finished successfully.

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-03031: Getting system version details of [psxnqycfd0cl01]

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-03032: Getting system version details of [psxnqycfd0cl01] finished successfully.

       

       

      ########## Agent validation ##########

      [Thu Jan 2 07:06:18 2014] INFO: Application commands and plug-in not defined. Skipping Agent validation task

       

       

      ########## Plugin validation ##########

      [Thu Jan 2 07:06:18 2014] INFO: Application not defined. Skipping Plugin validation task

      [Thu Jan 2 07:06:18 2014] INFO: Application not defined. Skipping Discovery task

       

       

      ########## Running storage discovery ##########

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-02113: Retrieving SnapVault relationships

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-02114: Retrieving SnapVault relationships on controller [qyfiler092a] finished successfully

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-02110: Retrieving SnapVault status

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-02111: Retrieving SnapVault status on controller [qyfiler053a] finished successfully.

      [Thu Jan 2 07:06:19 2014] ERROR: SCF-00019: SnapVault relationship for [qyfiler092a]:[unni_test] does not exist, Exiting!

      [Thu Jan  2 07:06:22 2014] ERROR: Task: storageDiscovery with config:frmsprf@frmsprf failed

      [Thu Jan 2 07:06:19 2014] INFO: Application not defined. Skipping cleanup task

       

       

      ########## Agent Workflow Finalization ##########

      [Thu Jan 2 07:06:19 2014] INFO: Agent Workflow Finalization started

      [Thu Jan 2 07:06:19 2014] WARN: SCF-00080: Agent finalization for workflow failed with warning [com.ctc.wstx.exc.WstxIOException: Connection refused]. Continuing.

       

       

      ########## Snap Creator Community Release 4.1.0c failed ##########

      [Thu Jan 2 07:06:19 2014] INFO: Pre Exit commands are not defined. Skipping !

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-05016: Creating a Operations Manager console event [script:critical-event] on [qycprdoc02.corp.intuit.net]

      [Thu Jan  2 07:06:22 2014] INFO: STORAGE-05017: OM Event [script:critical-event] on [qycprdoc02.corp.intuit.net] created successfully.

       

       

      [Thu Jan  2 07:06:22 2014] ERROR: Snap Creator Community Release 4.1.0c CLI action backup failed

      [root@qymedia04 frmsprf]#

      • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
        Siva Ramanathan NetApp Employee Kart Racer
        Currently Being Moderated

        On your destination controller, you must see this output below.

         

        on qyfiler053a

        snapvault status

        qyfiler092ar:/vol/unni_test/test qyfiler053a:/vol/sv_unni_test/test

         

        If not, you can recreate the snapvault using the steps below.

        1) You can release the existing snapvault relationship.

        2) Recreate the relationship on secondary qyfiler053a with the primary as qyfiler092ar

        snapvault start -S qyfiler092ar:/vol/unni_test/test qyfiler053a:/vol/sv_unni_test/test

         

        Please let us know.

        • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
          URADHAKRISHNAN Sprinter
          Currently Being Moderated

          Siva,

           

          On secondary i can see the relation.

           

          [uradhakrishnan-admin@qycprdoc01 ~]$ ssh qyfiler053a snapvault status qyfiler092ar:/vol/unni_test/test qyfiler053a:/vol/sv_unni_test/test

          Snapvault secondary is ON.

          Source                            Destination                         State          Lag        Status

          qyfiler092ar:/vol/unni_test/test  qyfiler053a:/vol/sv_unni_test/test  Snapvaulted    594:14:14  Idle

          [uradhakrishnan-admin@qycprdoc01 ~]$

          • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
            Siva Ramanathan NetApp Employee Kart Racer
            Currently Being Moderated

            Hello Unni,

            what happens when you run

             

            ssh qyfiler053a snapvault update /vol/sv_unni_test/test

          • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
            Siva Ramanathan NetApp Employee Kart Racer
            Currently Being Moderated

            Since your Lag time is about 24 days, my suspicion is that, the base snapshot (or qtree) may no longer exist on the source.

            • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
              URADHAKRISHNAN Sprinter
              Currently Being Moderated

              Snapvault update works fine..

               

              Re: Snap creator scServer4.1.0c version failing for 7 mode filers.$ ssh qyfiler053a snapvault update /vol/sv_unni_test/test

              Transfer started.

              Monitor progress with 'snapvault status' or the snapmirror log.

              Re: Snap creator scServer4.1.0c version failing for 7 mode filers.$  ssh qyfiler053a snapvault status | grep /vol/sv_unni_test/test

              qyfiler092ar:/vol/unni_test/test                                            qyfiler053a:/vol/sv_unni_test/test                             Snapvaulted    00:00:12   Idle

              Re: Snap creator scServer4.1.0c version failing for 7 mode filers.$

               

              Regards

               

              Unnikrishnan R

              Storage Operations

              Intuit Inc.

              Global Enterprise Solutions (GES) | Hosting & Employee Solutions (HES) | Infrastructure Delivery – Storage Operations

              • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                Siva Ramanathan NetApp Employee Kart Racer
                Currently Being Moderated

                Thank you for testing.

                 

                Could you please try below?

                On the Snap Creator Server, Edit /etc/hosts file and update IP address of the management interface for the hostname.

                Example:

                 

                If,

                10.10.10.1 qyfiler092a.corp.intuit.net

                10.10.10.2 qyfiler053a.corp.intuit.net

                 

                example:

                10.10.10.1      qyfiler092a

                10.10.10.2      qyfiler053a

                and comment this line

                #MANAGEMENT_INTERFACES=qyfiler092a:qyfiler092a.corp.intuit.net;qyfiler053a:qyfiler053a.corp.intuit.net

                • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                  URADHAKRISHNAN Sprinter
                  Currently Being Moderated

                  I tried installing SC version 4.0.0 and tested the backup. It worked fine. Same config is not working on 4.1.0c with same error. please let me know if you have any thoughts.

                   

                  [Sun Jan 19 22:55:07 2014] INFO: STORAGE-02111: Retrieving SnapVault status on controller [qyfiler053a] finished successfully.

                  [Sun Jan 19 22:55:04 2014] ERROR: SCF-00019: SnapVault relationship for [qyfiler092a]:[unni_test] does not exist, Exiting!

                   

                  i have setup SENDTRAP in my config, it sends emails for all warning , error and success. Does any one know how to control this ? i want an email only when there is a failure.

                  • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                    ktenzer NetApp Employee NASCAR racer
                    Currently Being Moderated

                    You can control SENDTRAP. If you use SUCCESS_TRAP the success messages will go there and only error messages will go to SENDTRAP.

                     

                    I usually do something like SUCCESS_TRAP=echo %MSG and then use SENDTRAP as you normally would to send email etc.

                     

                    As for snapvault issue, SC seems to not be finding relationship. SC looks on secondary to see the relationships and if you are using different interface, as you are it shows up different as the default controller name. This is why the SNAPVAULT_INTERFACES parameter exists, it lets you map a controller to another interface so SC can know what the correct interface which should be used to vault.

                     

                    Please try SECONDARY_INTERFACES=qyfiler092a:qyfiler092ar/qyfiler053a

                     

                    Regards,

                     

                    Keith

                    • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                      URADHAKRISHNAN Sprinter
                      Currently Being Moderated

                      Thanks for your reply.

                       

                      This is what I have for event config. This will alert for success and warning and failure.

                       

                      If I just setup “SENDTRAP” it will sent alerts for warning and failures. I need only for failures. Do you know any way to control that ?

                       

                      ########################################################################################################################

                      1.     Event Options                                                                                #

                      ########################################################################################################################

                      SUCCESS_MSG=INFO: NetApp Snap Creator Framework finished successfully "Action: %ACTION"

                      NTAP_ASUP_ERROR_ENABLE=N

                      SENDTRAP=echo %MSG | /bin/mailx -s snapcreator-failed unni@intuit.com

                      SUCCESS_TRAP=echo %MSG | /bin/mailx -s snapcreator-completed-successfully unni@intuit.com

                       

                      I have following in config and it was not working

                       

                      SECONDARY_INTERFACES=qyfiler092a:qyfiler092ar/qyfiler053ar

                       

                      Let me try with

                       

                      SECONDARY_INTERFACES=qyfiler092a:qyfiler092ar/qyfiler053a

                       

                      Regards

                       

                      Unnikrishnan R

                      Storage Operations

                      Intuit Inc.

                      Global Enterprise Solutions (GES) | Hosting & Employee Solutions (HES) | Infrastructure Delivery – Storage Operations

                    • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                      URADHAKRISHNAN Sprinter
                      Currently Being Moderated

                      Keith,

                       

                      No luck with that config too

                       

                      Re: Snap creator scServer4.1.0c version failing for 7 mode filers. INFO: STORAGE-02111: Retrieving SnapVault status on controller Re: Snap creator scServer4.1.0c version failing for 7 mode filers. finished successfully.

                      Re: Snap creator scServer4.1.0c version failing for 7 mode filers. ERROR: SCF-00019: SnapVault relationship for Re: Snap creator scServer4.1.0c version failing for 7 mode filers.:[unni_test] does not exist, Exiting!

                       

                       

                      Regards

                       

                      Unnikrishnan R

                      Storage Operations

                      Intuit Inc.

                      Global Enterprise Solutions (GES) | Hosting & Employee Solutions (HES) | Infrastructure Delivery – Storage Operations

                      • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                        ktenzer NetApp Employee NASCAR racer
                        Currently Being Moderated

                        Ok was worth a shot.

                         

                        Can you try with SC 4.1? This is the NGS supported version and it released about 3 months after community, there were many bugs and regressions fixed and this could be one of them. I dont have environment setup to test this but if you do it might be worth your while.

                         

                        You can download SC 4.1 from here: http://support.netapp.com/NOW/download/software/snapcreator_framework/4.1/

                         

                        Keep in mind upgrade from community releases to NGS releases is not supported. You can however do fresh install and copy over config files.

                         

                        If you dont have time to test this then I am sure Siva will do this asap.

                         

                        Regards,

                         

                        Keith

                        • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                          URADHAKRISHNAN Sprinter
                          Currently Being Moderated

                          Keith,

                           

                          I tested this already with 4.1 and face same issue. I have opened a case now and working with NGS.

                           

                          Regards

                           

                          Unnikrishnan R

                          Storage Operations

                          Intuit Inc.

                          Global Enterprise Solutions (GES) | Hosting & Employee Solutions (HES) | Infrastructure Delivery – Storage Operations

                          • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                            gdefevere Sprinter
                            Currently Being Moderated

                            I have the same issue, is there a solution yet for this problem ? Regards, Geert

                            • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                              URADHAKRISHNAN Sprinter
                              Currently Being Moderated

                              Geert,

                               

                              We got the solution for out problem.

                               

                              In the config file "CMODE_SET=N" and try. This is required for 7 mode snapcreators.

                               

                              Hope this will help you.

                              • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                                gdefevere Sprinter
                                Currently Being Moderated

                                Tnx for reply. Checked my config file and the setting is already set to N.

                                 

                                ########################################################################################################################

                                #     CMode Options                                                                                                    #

                                ########################################################################################################################

                                CMODE_CLUSTER_NAME=

                                CMODE_CLUSTER_USERS=

                                CMODE_SNAPSHOT_FORCE_DELETE=Y

                                CMODE_SET=N

                                 

                                Anyone else has a suggestion ?

                                • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                                  URADHAKRISHNAN Sprinter
                                  Currently Being Moderated

                                  Can you share  the error you are getting and I can take a look.

                                   

                                  Regards

                                   

                                  Unnikrishnan R | Storage Operations

                                  Work Phone: +91 80 41769752 | Cell Phone: +91 9886859322 | unnikrishnan_radhakrishnan@intuit.com

                                   

                                  Intuit | simplify the business of life

                                  • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                                    gdefevere Sprinter
                                    Currently Being Moderated
                                    15

                                     

                                    STORAGE-02113: Retrieving SnapVault relationships

                                     

                                    16

                                     

                                    STORAGE-02114: Retrieving SnapVault relationships on controller [XXXXXX] finished successfully

                                     

                                    17

                                     

                                    SCF-00019: SnapVault relationship for [XXXXXXXXX]:[smo_rmgtqtms01_qtms_backup] does not exist, Exiting

                                     

                                    But they exists :

                                     

                                    sourcefiler:/vol/Test_QTMS_Arch/qt_Test_QTMS_Arch                           destinationfiler:/vol/smo_rmgtqtms01_qtms_backup/qt_Test_QTMS_Arch                             Snapvaulted13:07:24   Idle
                                    sourcefiler:/vol/Test_QTMS_Data/qt_Test_QTMS_Data                           destinationfiler:/vol/smo_rmgtqtms01_qtms_backup_1/qt_Test_QTMS_Data                           Snapvaulted13:07:54   Idle
                                    • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                                      URADHAKRISHNAN Sprinter
                                      Currently Being Moderated

                                      can you share the config file ?

                                      • Re: Snap creator scServer4.1.0c version failing for 7 mode filers.
                                        gdefevere Sprinter
                                        Currently Being Moderated

                                        I replaced realnames (italic). Job runs, without snapvault update !

                                         

                                        CONFIG_TYPE=STANDARD

                                        VOLUMES=SourceNetapp:Test_QTMS_Arch,Test_QTMS_Data;DestNetapp:smo_rmgtqtms01_qtms_backup_1,smo_rmgtqtms01_qtms_backup

                                        META_DATA_VOLUME=

                                        LOG_NUM=30

                                        SNAPDRIVE=N

                                        SNAPDRIVE_DISCOVERY=Y

                                        LOG_TRACE_ENABLE=N

                                        NTAP_PWD_PROTECTION=Y

                                        USE_PROXY=N

                                        NTAP_TIMEOUT=60

                                        USE_GLOBAL_CONFIG=N

                                        FEDERATED_APPLICATIONS=

                                        ALLOW_IP_ADDR=N

                                        SC_TMP_DIR=

                                         

                                        ########################################################################################################################

                                        #     Connection Options                                                                                               #

                                        ########################################################################################################################

                                        NTAP_USERS=SourceNetapp:root/password;DestNetapp:root/password

                                        MANAGEMENT_INTERFACES=

                                        PORT=443

                                        TRANSPORT=HTTPS

                                        SECONDARY_INTERFACES=

                                         

                                        ########################################################################################################################

                                        #     CMode Options                                                                                                    #

                                        ########################################################################################################################

                                        CMODE_CLUSTER_NAME=

                                        CMODE_CLUSTER_USERS=

                                        CMODE_SNAPSHOT_FORCE_DELETE=Y

                                        CMODE_SET=N

                                         

                                        ########################################################################################################################

                                        #     Snapshot Options                                                                                                 #

                                        ########################################################################################################################

                                        SNAME=smo_prism_daily_

                                        SNAP_TIMESTAMP_ONLY=Y

                                        NTAP_SNAPSHOT_POLICIES=

                                        NTAP_USE_EXTERNAL_SNAPSHOT=N

                                        NTAP_SNAPSHOT_NODELETE=N

                                        NTAP_CONSISTENCY_GROUP_TIMEOUT=MEDIUM

                                        NTAP_CONSISTENCY_GROUP_WAFL_SYNC=N

                                        NTAP_SNAPSHOT_RETENTION_AGE=

                                        NTAP_SNAPSHOT_DELETE_BY_AGE_ONLY=N

                                        NTAP_SNAPSHOT_RESTORE_AUTO_DETECT=N

                                        NTAP_SNAPSHOT_LABEL=smo_prism_daily_

                                        NTAP_SNAPSHOT_CLEANUP=N

                                        NTAP_EXTERNAL_SNAPSHOT_REGEX=.*

                                        ALLOW_DUPLICATE_SNAME=N

                                        NTAP_SNAPSHOT_RETENTIONS=DAILY:7

                                        NTAP_SNAPSHOT_CREATE_CMD01=

                                        NTAP_CONSISTENCY_GROUP_SNAPSHOT=N

                                        NTAP_METADATA_SNAPSHOT_CREATE_CMD=

                                        NTAP_SNAPSHOT_DEPENDENCY_IGNORE=N

                                        NTAP_SNAPSHOT_DISABLE=N

                                         

                                        ########################################################################################################################

                                        #     SnapVault Options                                                                                                #

                                        ########################################################################################################################

                                        NTAP_SNAPVAULT_UPDATE=Y

                                        SNAPVAULT_QTREE_INCLUDE=

                                        NTAP_SNAPVAULT_NODELETE=N

                                        NTAP_SNAPVAULT_RESTORE_WAIT=N

                                        NTAP_SNAPVAULT_RETENTION_AGE=

                                        NTAP_SNAPVAULT_SNAPSHOT=Y

                                        NTAP_SNAPVAULT_MAX_TRANSFER=

                                        NTAP_SNAPVAULT_WAIT=60

                                        NTAP_SNAPVAULT_RETENTIONS=DAILY:21

                                        SNAPVAULT_VOLUMES=DestNetapp:smo_rmgtqtms01_qtms_backup,smo_rmgtqtms01_qtms_backup_1

                                         

                                        ########################################################################################################################

                                        #     SnapMirror Options                                                                                               #

                                        ########################################################################################################################

                                        NTAP_SNAPMIRROR_WAIT=60

                                        NTAP_SNAPMIRROR_USE_SNAPSHOT=N

                                        NTAP_SNAPMIRROR_MAX_TRANSFER=

                                        SNAPMIRROR_VOLUMES=

                                        SNAPMIRROR_CASCADING_VOLUMES=

                                        NTAP_SNAPMIRROR_CASCADING_UPDATE=N

                                        NTAP_SNAPMIRROR_UPDATE=N

                                         

                                        ########################################################################################################################

                                        #     Clone Options                                                                                                    #

                                        ########################################################################################################################

                                        NTAP_CLONE_IGROUP_MAP=

                                        NTAP_NFS_EXPORT_ACCESS=read-only

                                        NTAP_LUN_CLONE_RESERVATION=N

                                        NTAP_CLONE_SECONDARY_VOLUMES=

                                        NTAP_NUM_VOL_CLONES=1

                                        NTAP_NFS_EXPORT_PERSISTENT=N

                                        NTAP_CLONE_FOR_BACKUP=N

                                        NTAP_CIFS_EXPORT_ENABLE=N

                                        NTAP_CLONE_SECONDARY=N

                                        NTAP_NFS_EXPORT_HOST=

                                        NTAP_VOL_CLONE_RESERVE=NONE

                                         

                                        ########################################################################################################################

                                        #     ProtectionManager Options                                                                                        #

                                        ########################################################################################################################

                                        NTAP_DFM_DATA_SET=

                                        NTAP_PM_RUN_BACKUP=N

                                        NTAP_PM_UPDATE=N

                                        NTAP_DFM_SNAPSHOT_FORMAT=

                                         

                                        ########################################################################################################################

                                        #     OperationsManager Options                                                                                        #

                                        ########################################################################################################################

                                        OM_TRANSPORT=HTTPS

                                        OM_HOST=onCommandServer

                                        OM_EVENT_GENERATE=Y

                                        OM_USER=rmg\s_netappssv

                                        OM_PWD=7645724c56413547633237695169794b4a52413259673d3d0a

                                        OM_PORT=8488

                                         

                                        ########################################################################################################################

                                        #     OSSV Options                                                                                                     #

                                        ########################################################################################################################

                                        NTAP_OSSV_FS_SNAPSHOT=

                                        NTAP_OSSV_FS_SNAPSHOT_CREATE_CMD01=

                                        NTAP_OSSV_HOMEDIR=

                                        NTAP_OSSV_ENABLE=N

                                         

                                        ########################################################################################################################

                                        #     APP Commands                                                                                                     #

                                        ########################################################################################################################

                                        UMOUNT_CMD01=

                                        ARCHIVE_CMD01=

                                        APP_UNQUIESCE_CMD01=

                                        MOUNT_CMD01=

                                        APP_QUIESCE_CMD01=

                                         

                                        ########################################################################################################################

                                        #     Pre Commands                                                                                                     #

                                        ########################################################################################################################

                                        PRE_CLONE_CREATE_CMD01=

                                        PRE_RESTORE_CMD01=

                                        PRE_EXIT_CMD01=

                                        PRE_NTAP_CMD01=

                                        PRE_APP_UNQUIESCE_CMD01=

                                        PRE_APP_QUIESCE_CMD01=

                                        PRE_NTAP_CLONE_DELETE_CMD01=

                                         

                                        ########################################################################################################################

                                        #     Post Commands                                                                                                    #

                                        ########################################################################################################################

                                        POST_NTAP_DATA_TRANSFER_CMD01=

                                        POST_RESTORE_CMD01=

                                        POST_APP_QUIESCE_CMD01=

                                        POST_NTAP_CMD01=

                                        POST_CLONE_CREATE_CMD01=

                                        POST_APP_UNQUIESCE_CMD01=

                                         

                                        ########################################################################################################################

                                        #     Event Options                                                                                                    #

                                        ########################################################################################################################

                                        SUCCESS_MSG=INFO: NetApp Snap Creator Framework finished successfully "(Action: %ACTION) (Config: %CONFIG_NAME)"

                                        NTAP_ASUP_ERROR_ENABLE=N

                                        SENDTRAP=

                                        SUCCESS_TRAP=

                                         

                                        ########################################################################################################################

                                        #     Agent Options                                                                                                    #

                                        ########################################################################################################################

                                        SC_AGENT_UNQUIESCE_TIMEOUT=305

                                        SC_AGENT_WATCHDOG_ENABLE=N

                                        SC_AGENT=WindowsOracleServer:9090

                                        SC_AGENT_LOG_ENABLE=N

                                        SC_AGENT_TIMEOUT=300

                                         

                                        ########################################################################################################################

                                        #     Clone Target Options                                                                                             #

                                        ########################################################################################################################

                                        SC_CLONE_TARGET=

                                         

                                        ########################################################################################################################

                                        #     Application Options                                                                                              #

                                        ########################################################################################################################

                                        APP_IGNORE_ERROR=N

                                        APP_NAME=oracle

                                        APP_CONF_PERSISTENCE=Y

                                        APP_DEFINED_RESTORE=N

                                        PYTHON_OPTS=

                                        APP_DEFINED_CLONE=N

                                        JAVA_HOME=

                                        PYTHON_HOME=

                                        FS_NAME=

                                        JVM_ARGS=

                                        PERL_HOME=

                                        PERL_OPTS=

                                        PLUGINS_FORWARD=

                                        VALIDATE_VOLUMES=

                                        APP_AUTO_DISCOVERY=N

                                        JAVA_CLASSPATH=

                                        PLUGINS_RESTORE=

                                        APP_DEFINED_BACKUP=N

                                        APP_DEFINED_UMOUNT=N

                                        PLUGINS_REVERSE=

                                        APP_DEFINED_MOUNT=N

                                         

                                        ########################################################################################################################

                                        #     Archive Options                                                                                                  #

                                        ########################################################################################################################

                                        ARCHIVE_LOG_RECURSIVE_SEARCH=N

                                        ARCHIVE_LOG_DIR=

                                        ARCHIVE_LOG_EXT=

                                        ARCHIVE_LOG_RETENTION=

                                        ARCHIVE_LOG_ENABLE=

                                         

                                        ########################################################################################################################

                                        #     Plug-In Parameter                                                                                                #

                                        ########################################################################################################################

                                        ORACLE_DATABASES=PRISM:SMODBA

                                        CNTL_FILE_BACKUP_DIR=H:\

                                        ARCHIVE_LOG_ONLY=N

                                        ORACLE_HOME=D:\oracle\product\11.2.0.4\dbhome_1

                                        ORA_TEMP=I:\

                                        ORACLE_BACKUPMODE=daily:online

                                        SQLPLUS_CMD=D:\oracle\product\11.2.0.4\dbhome_1\bin\sqlplus.exe

                                        ORACLE_EXPORT_PARAMETERS=N

More Like This

  • Retrieving data ...

Legend

  • Correct Answers - 10 points
  • Helpful Answers - 5 points