4 Replies Latest reply: Dec 19, 2013 5:57 AM by denis.mukhamedov RSS

VMware and NetApp in iSCSI SAN

denis.mukhamedov Novice
Currently Being Moderated

Hello guys,

 

Here is the situation:

We have 6 blade servers (HP BL420c), two interconnect switches HP 6120XG and NetApp FAS2240-2 with dual controllers and two 10GbE ports per controller.

VMware vSphrere 5.1 Standard will be used on the servers. We have one 10GbE dual-port NIC per server. Protocol of choice is iSCSI.

To save storage space I want to create one aggregate and 3 volumes on it. Two of them will be presented to VMware hosts.

I'm not sure how to make interconnect links between all this stuff.

 

First option is to link two ports of the first controller to first switch (using VIF) and two port ports of the second controller to second switch (using VIF). In this case I'm not sure how the second controller would handle the iSCSI traffic. Will it pass the traffic to first controller through interconnect? Or the second controller will not be used until failover?

Second option is to connect first port to first swich, second port to second switch etc.

 

Also, VMware recommends to add 1 VMkernel per 1 physical port for iSCSI traffic. I'm going to use 1 standard vswitch with VLANs, so traffic should be separated. What load balance technology should i choose on host side?

 

Please help to choose the right scheme for this situation.

 

Best regards

 

Message was edited by: Denis Mukhamedov

  • Re: VMware and NetApp in iSCSI SAN
    BALAJI.VENKATRAMAN Sprinter
    Currently Being Moderated

    Hi Denis,

     

    Seems you have misinterpreted the function of the Cluster Interconnect - No host will access data over  the interconnect .This cable if for communication between the cluster partners who replicate each other's NVRAM contents before being flushed to disk.

     

    In you case - I think you can connect each 10 GB port on one filer head (say filer A) to both the switches (for redundancy and load balancing).I am sure you will connect the other filer heads network ports also to these two switches (for vfilers to be created in filer B).Include the partner statement in the RC file and whenver a failover happens - the traffic will be passed over from the partner filer's interface as the resources and vfilers will failover from filer A to filer B?

    Make sure that whichever VLAN's are present on Filer A (which is the primary location of the ESX datastores) - the same are created in the Filer B as well as the second switch to ensure that the hosts can still reach the vfiler IP;s in that particular VLAN.

     

    Let me know if this helps or not

     

    Balaji

  • Re: VMware and NetApp in iSCSI SAN
    denis.mukhamedov Novice
    Currently Being Moderated

    I've uploaded two schemes.

    Balani, I think you suggest the second. But in the first I will have more network throughput, that's why I'm not sure which scheme to use.

More Like This

  • Retrieving data ...

Legend

  • Correct Answers - 10 points
  • Helpful Answers - 5 points