2 Replies Latest reply: Sep 3, 2013 3:20 PM by cgeck0000 RSS

How to move DS4243 disk shelf to FAS2240-2?

Currently Being Moderated

Currently, we have a FAS2050 with a DS4243 connected. One root volume is on the internal drives of the FAS2050 and the other root volume is on the DS4243.


We're migrating all data from the FAS2050\DS4243 to a FAS2240-2. After this is done we want to disconnect the DS4243 and reconnect it to the FAS2240-2 and create a new aggregate.


My thoughts on doing this are to console into the FAS2050 node that the root volume is on the DS4243 and do a zero out of all the disks so Data ONTAP 7.3.5 is no longer recognized.


Then remove the current SAS cables on the FAS2240-2 chassis and connect the DS4243.


Something that I am not familiar with is the short SAS cables connected to the back on the FAS2240-2 now. Are these necessary to allow the internal drives to be accessed by each node? Can I remove the short SAS cables hot without disruption to the system and add the DS4243?


Thank you all.

More Like This

  • Retrieving data ...