We tested a Windows 2012 Server Standard and we put it the NetApp SnapDrive 6.5 that has support for Windows 2012 .
Storage system is an NetApp FS2040 with ONTAP 7.3.6
1 Fresh install of Windows 2012 , and with a Full Windows Update.
2 We have 2 LUNs in Cluster Shared Mode witch we want to connect to this Server.
3 Installed SnapDrive 6.5 , everything finished with Success.
4 We try to connect from Snap Drive to the first LUN , worked OK .
5 When we try to connect to second LUN , to the Quorum LUN I get an error , Can't find LUN . An after that I get a lot of Errors in System Logs .
EventID 9 : Target did not respond in time for a SCSI request. The CDB is given in the dump data. Sourse : iScsiPrt
EventID 39 : Initiator sent a task management command to reset the target. The target name is given in the dump data. Sourse: iScsiPrt
EventID 129: The description for Event ID 129 from source iScsiPrt cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
6 After that every time the Snap Manager console is blocking, not responding when I hit the Disk Options !
There is a rule iSCSI Service ( TCP-In ) which is Enable in Windows Firewall .