3 Replies Latest reply: Jul 6, 2013 8:42 PM by kletzly RSS

SC4.0 OSSV Support

marks NetApp Employee Novice
Currently Being Moderated

Does anyone have a write up of the steps required for enabling OSSV backup via the SC 4.0 GUI? I need this for Linux and Windows clients.

 

Thanks,

Mark

  • Re: SC4.0 OSSV Support
    ktenzer NetApp Employee NASCAR racer
    Currently Being Moderated

    It is a CLI only option

     

    You can in GUI download config, edit it locally, and then upload but you need to change the OSSV* settings yourself. In addtion you need to do a snapvault status on OSSV host and add that to VOLUMES parameter. Format is "host:<path>" for example VOLUMES=myhost:C\

     

    I think in windows you have to leave off the ":" as we use this as a separator.

     

    Regards,

     

    Keith

  • Re: SC4.0 OSSV Support
    marcel.juhnke Certified Novice
    Currently Being Moderated

    I paste you a sample of configuration options that work for us:

     

    VOLUMES=HOFDBDC2001:SystemState #(this is the source dir on the OSSV agent)

     

    NTAP_USERS=secondary:user/passwd

     

    NTAP_OSSV_FS_SNAPSHOT=N

    NTAP_OSSV_FS_SNAPSHOT_CREATE_CMD01=

    NTAP_OSSV_HOMEDIR="C:\Program Files\NetApp\snapvault"

    NTAP_OSSV_ENABLE=Y

     

    APP_IGNORE_ERROR=Y

     

    The parameter to ignore app errors is needed, because otherwise the SC job always puts out a failure, because it thinks the two 'Transfer Error' lines in the ossv output (as follows) indicates an error in the application quiesce.

     

    [2013-06-24 04:56:12,170] DEBUG: [10.135.200.131:28002(4.0.0.1)] ossv snapvault status: "C:\Program Files\NetApp\snapvault"/bin/snapvault status -l SystemState finished with
    exit code:  0
    stdout: Snapvault primary is ON

    Source:                       HOFDBDC2002:SystemState
    Destination:                  p2psd014:/vol/hofdbx_mgmt_svault/HOFDBDC2002_SystemState
    Status:                       Transferring
    State:                        Source
    Lag:                          24:01:04
    Mirror Timestamp:             -
    Base Snapshot:                -
    Current Transfer Type:        -
    Contents:                     -
    Last Transfer Type:           -
    Last Transfer From:           -
    Bytes transferred so far:     0 KB
    Transfer Time Elapsed:        00:00:01
    Current Transfer Throttle:    Unthrottled
    Total files to transfer:      13513
    Total files transferred:      0
    Current File Size:            0
    Current File Progress:        0
    Current File Name:
    Transfer Error ID:            -
    Transfer Error Message:       -

  • Re: SC4.0 OSSV Support
    kletzly NetApp Employee Cyclist
    Currently Being Moderated

    I took Marcel's example above which was non-Windows

    and have pasted relevant parts from my config file -- which will show windows syntax

     

    VOLUMES=MJK_4_NTAPSC:C\OPT\PlaySvBackup

     

    NTAP_OSSV_ENABLE=Y

    NTAP_OSSV_HOMEDIR=C:\OPT\snapvault

    NTAP_OSSV_FS_SNAPSHOT=N

    NTAP_OSSV_FS_SNAPSHOT_CREATE_CMD01=

     

    etc.

More Like This

  • Retrieving data ...

Legend

  • Correct Answers - 10 points
  • Helpful Answers - 5 points