1 Reply Latest reply: Feb 15, 2013 8:13 AM by ASHWINPAWARTESL RSS

Multiple IP over single interface

SANTOSH_DEV
Currently Being Moderated

Hi

 

In FAS 2240 filer I am having 2 number 10 GB ports. Here I want to distrubute CIFS and NFS traffic over different VLAN.

 

I have to configure multiple IP over single interface . There is any optionavailable on Data Ontap for this configuration.

 

I have read one article for configurating alian over interface.

 

If I configure alis whether this will work for two different IP with different subnet.

 

https://library.netapp.com/ecmdocs/ECMM1278347/html/nag/networking/concept/c_oc_netw_ifconfig_alias.html#c_oc_netw_ifconfig_alias

  • Re: Multiple IP over single interface
    ASHWINPAWARTESL
    Currently Being Moderated

    I think if you are creating a VLAN, then why do you need alias? I haven't worked on 10G mezzanine ethernet ports, but I think it is a dual port on each head. I suggest you create a ifgrp single mode (failover) and add respective VLANs to it.


    Example:
    If you are creating vif: (single mode:Active/Passive failover)
    ifgrp create single vif1 e1a e1b
    vlan create vif1 10 (NFS)
    vlan add vif1 20 (CIFS)

    ifconfig vif1-10 192.168.10.2 netmask 255.255.255.0 mtusize 1500 partner vif1-10 nfo
    ifconfig vif1-20 192.168.20.2 netmask 255.255.255.0 mtusize 1500 partner vif1-20 nfo

     

    If you are not creating vif:
    vlan create e1a 10 (NFS)
    vlan add e1a 20 (CIFS)
    ifconfig e1a-10 192.168.10.2 netmask 255.255.255.0 mtusize 1500 partner e1a-10 nfo
    ifconfig e1a-20 192.168.20.2 netmask 255.255.255.0 mtusize 1500 partner e1a-20 nfo

     

    Experts please chip in here.

More Like This

  • Retrieving data ...