4 Replies Latest reply: Feb 18, 2013 2:24 AM by radek.kubka RSS

FAS2220 iSCSI - No LUNs showing up in Windows 2008

Currently Being Moderated



I have a FAS2220 that I've just enabled/licensed iSCSI on. I'm trying to connect to three LUNs that I've created in OnCommand.  I can discover the iSCSI target by IP address in the Windows iSCSI Initiator, but when I go to Volumes and Devices, I do not see any of the LUNs available so that I can mount them.


In OnCommand, I created 3 LUNs, and set the permissions to allow any connections. I then added the Initiator Name that was generated by Windows.


Unfortunately OnCommand is now hanging on me, so I can't really get into any more detail than that. The windows initiator is (as best I can tell) is allowed to connect, the target comes up, the LUNs are online, but nothing shows up under Volumes and Devices in Windows (2008 Server R2).


Any insight would very much be appreciated. Thanks!

More Like This

  • Retrieving data ...