We have 3 DFM in our environnement, The connection was successfull for the 3 but when I try to Pull the data from Insight Report I got an error on 2 DFM and one is working
Is that possible to insert more then one DFM ?
Here is the capture of the error:
We are running version 1.1.
I would suggest you to open a NGS support case for this.
Also, there is a log collection tool on NetApp support site http://support.netapp.com/NOW/download/tools/ocr_logcollector/ This tool collects all relevant logs. Provide them with log zip file as well.
yes, in the NetApp Interoperability matrix it show that is supported but on the
the On Command 5.1 is not in the supported version
OnCommand Report supports DataFabric Manager server 4.0, 4.0.1, 5.0, 5.0.1,5.0.2.
Everyone needs to remember that OnCommand Insight Report (OCIR) and OnCommand Report (OCR) are 2 very different & distinct reporting applications. I use OnCommand Unified Manager - OCUM - (previously called DFM) 5.1 and can readily use OCR with it to create a report with just about anything I want EXCEPT those relating to snapmirror and snapvault because OCR does not have the ability to read the tables. However, OCIR does not work with OCUM. My OCUM version is 18.104.22.16808 (5.1)
The interoperability matrix is correct, the pdf is dated. OCR 1.1 works with DFM 5.1 7-mode. DFM 5.x clustered ONTAP is not compatible. I recently investigated the correct compatibility for a customer. I have not investigated the many to one, but it should work. Have you tried each DFM individually? (ie: remove the other two connections)