63 Replies Latest reply: Mar 6, 2013 7:31 PM by dburkland RSS

VSC 4.1 and NFS => No matching networks

ricardoduarte
Currently Being Moderated

Hi,

 

I have one FAS with a vfiler1. The vfiler1 is connected to VLAN 50 (10.211.50.x) and VLAN 51 (10.211.51.x).

My ESX hosts also are connected to VLAN 50 and VLAN 51.

I can manually mount datastores from the vfiler just fine.

But when I try to provision datastores with VSC I get the following error:

 

- Can not create NFS datastore - This could be because there is no matching networks between the controller and the ESX VMkernel(s) or in the case of cluster mode to prevent indirect data access

 

If I go to "Resources", under the VSC Provisioning and Cloning Tab, I am not able to see the IP addresses of the vfiler1. Just the IPs of the vfiler0. But the vfilers are correctly detected on the "Monitoring and Host Configuration" tab.

VSC 4.0.0 works fine.

Any idea how can I make this 4.1.0 work?

 

Thanks.

More Like This

  • Retrieving data ...