Netapp 2020 filer, ESXi v5
I'm trying to add a a path to a datastore on my esxi server. When I enter the ip address in the dynamic section of the software ISCSI hba and then rescan the adapter in vcenter i receive this message in the syslog of the filer:
ISCSI: Initiator iqn.1998-01.com.vmware:virtualbox3.xxxxxxxx.com:533700627:33 does not have access to interface e0b
I've looked everywhere I could think in the netapp config. The interface has iscsi enabled and all the initiators are mapped correctly with no authentication.
These datastores were working correctly (dynamic discovery) prior to me changing the ip address of that interface (e0b) and the ip of the nic in the vm host. I am able to ping both addresses from a machine on the same vlan, so I'm pretty sure they are talking correctly. I guess I'm just at a loss on what to look at next.
Thanks for any help.
Here's what I get with those commands:
netapp1b> options interface
interface.blocked.mgmt_data_traffic off (value might be overwritten in takeover)
netapp1b> iscsi interface show
Interface e0a enabled
Interface e0b enabled