I am running into an issue cloning VMs in such a fashion that they are usable with VMware View. I run through the Create Rapid Clones wizard, get to the section where I'm configuring the View pool, click Next, and receive an error "Could not validate the desktop names." Once this happens, I have to close out of the vSphere Client altogether; otherwise, the NetApp VSC screens show up as either blank pages or they show either 403 or 404 errors.
Has anyone seen this kind of behavior before, and do you have any suggestions for remedying it?
I found a KB that documents a similar error:
If your issue persists, please open a NetApp Support case.
I'm sorry to hear that, For my own knowledge the solution in the KB article didn't work?
Despite the fact that the storage controllers appear in the Storage Controller pane, one must also identify the storage controllers to be used for cloning. This process is described on page 19 of the NetApp VSC for VMware 2.0 vSphere Provisioning and Cloning Administration Guide.
The instructions start with 'Select the NetApp icon for the vCenter Server'.
Note: The default view is the inventory panes.
I sure didn't. I have a theory, but I don't have the time right now to test it. Basically, my theory is that the vSphere server is unable to resolve the names of the spawned VMs since the target environment is in a different domain from the vSphere server, one which is logically isolated from the rest of the network. Possible workarounds involve setting up a DNS forwarding rule to the isolated domain, setting up a second vCenter server, or figuring out a way to configure an interface on the main vCenter server allowing it access into the isolated network. Let me know if any of that is helpful.