35 Replies Latest reply: Apr 18, 2010 8:31 PM by lwei RSS

Backup Verification Error with SME 6.0 against an Exchange 2010

mrphoenix
Currently Being Moderated

Hi folks,

 

After some initial problems with installing SME 6.0 I finally got this solved. It was a permission problem on our DCs that drove our Exchange nuts ...


Finally I got the backup configured and running, now I'm having some other erros and don't know how so solve them. Maybe somebody can help?

 

I'm seeing these errors for each DB that has to be verified:

 

----------

EventSource: SnapDrive

EventID: 1116

 

Failed to connect to LUN. VDS volume object for the LUN s/n 'C4iAWJV2-xA3' has not been found
.

 

LUN Name = mec-eu02
Storage Path = /vol/vol2imx/.snapshot/exchsnap__framsexm10_02-21-2010_22.00.15/mx_db02/
Protocol Type = LUN
Storage System Name = franapfs0001
Requested Mount Point = franapfs0001:/vol/vol2imx/.snapshot/exchsnap__framsexm10_02-21-2010_22.00.15/mx_db02/mec-eu02
Assigned Mount Point = C:\Program Files\NetApp\SnapManager for Exchange\SnapMgrMountPoint\MPDisk001\

 

Error code :

 

----------

EventSource: SnapDrive

EventID: 178

 

Failed to connect the LUN in Snapshot copy (exchsnap__framsexm10_02-21-2010_22.00.15) as drive C:\Program Files\NetApp\SnapManager for Exchange\SnapMgrMountPoint\MPDisk001\ on the computer (FRAMSEXM10).

 

LUN Name = mec-eu02
Storage Path = /vol/vol2imx/mx_db02/
Protocol Type = LUN
Storage System Name = franapfs0001

 

Error code : VDS volume object for the LUN s/n 'C4iAWJV2-xA3' has not been found

 

----------

EventSource: SnapManager For Exchange

EventID: 245

 

SnapManager database integrity verification did not complete after the backup on server 'FRAMSEXM10' for storage group/database 'mec-eu02'.

 

---------

EventSource: SnapManaer For Exchange

EventID: 246

 

SnapManager database integrity verification did not complete after the backup on server 'FRAMSEXM10' for storage group/database 'mec-eu02'.

 

---------

EventSource: SnapManager for Exchange

EventID: 274

 

Exchange writer will not truncate transaction log files because SnapManager backup verification for 'mec-eu02' failed. The SnapManager backup verification failure should be resolved right away as transaction log LUN can run out of disk space.

 

Component name: 99453e30-3913-4bf0-8b55-a3b136713678

 

---------

EventSource: MSExchangeIS

EventID: 9782

 

Exchange VSS Writer (instance 052d09e3-50b3-4ef9-99d8-e4621882d62b:8) has completed the backup of database 'mec-eu02' with errors. The backup did not complete successfully, and no log files were truncated for this database.

 

---------

EventSource: ESE

EventID: 2007

 

Information Store (3608) Shadow copy instance 8 aborted.

 

For more information, click http://www.microsoft.com/contentredirect.asp.

 

 

 

Hopefully somebody knows what to do!

 

Best regards,

Philipp

  • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
    lwei
    Currently Being Moderated

    So, the backup was created successfully; but the verification failed? Was the LUN mounted correctly?   -Wei

    • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
      mrphoenix
      Currently Being Moderated

      Hi lwei,

       

      As far as I can see the backup was done.

      The errormessage I get via Mail states:

       

      *****BACKUP DETAIL SUMMARY*****

      Backup group set #1:

      Backup SG/DB [DB-Name] Error: Failed to verify physical integrity of the databases

       

      *****BACKUP RESULT SUMMARY*****

      Backup group set #1:

      Backup SG/DB [DB-Name]: Backup OK, verification failed

       

      Backup failed.[SnapDrive Error]:VDS volume object for the LUN s/n 'C4iAWJV3Pvdl' has not been found

       

      So the LUN can't be mounted ... could it be that it's a simply "Access Denied" from the Windows 2008 R2 Box? The Snapmanager trys to mount the volume in the "Progam Files"-Tree and even as an Administrator you can't add something there without this nagging "Are you really sure"-Prompt...

       

      Greetings,

      Philipp

      • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
        radek.kubka
        Currently Being Moderated
        could it be that it's a simply "Access Denied" from the Windows 2008 R2 Box?

        Hi,

         

        I don't think this is the reason, as I've seen SnapDrive successfully mounting LUNs in a directory on Win2k8 in a lab environment, but you may change verification settings, so SME & SnapDrive uses drive letter, rather than mount point.

         

        Regards,

        Radek

        • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
          mrphoenix
          Currently Being Moderated

          Hi Radek,

           

          I've changed to a different mount point and to a driveletter. But there's no change.

           

          I'm stip getting this error via Mail:

           

          ****VERIFICATION RESULT SUMMARY*****

           

          Verification SG/DB [DB-Name]: Database Verification Failed

           

          Database verification failed.

           

          Error: 0xC004030F, VDS volume object for the LUN s/n '%1' has not been found

           

          The Report states the following:

           

          SnapManager for Exchange

           

          ******VERIFICATION OVERALL JOB DESCRIPTION*******

           

          Server: FRAMSEXM10
          Verify Storage Group/Database 1: mec-eu03
          There are 1 Database(s)

           

          Backup Management Group: Standard
          This is an operation which will only run database physical integrity verification.
          The most 1 recent snapshots will be verified
          The verification will be run on computer FRAMSEXM10.
          Verification throttling is not enabled or supported.

           

          Exchange Server [14.0.639.21]

           

          [PowerShell Cmdlet]: get-exchangeserver -status -identity FRAMSEXM10
          [PowerShell Cmdlet]: get-mailboxdatabase -Server FRAMSEXM10 -DomainController "framsdc02.magna.global" ; get-publicfolderdatabase -Server FRAMSEXM10 -DomainController "framsdc02.magna.global"
          [PowerShell Cmdlet]: Get-Mailboxserver -Identity "FRAMSEXM10"
          [PowerShell Cmdlet]: Get-MailboxDatabase -id "Mailbox Database 0653707672" | select-object ActivationPreference -ExpandProperty ActivationPreference
          [PowerShell Cmdlet]: Get-MailboxDatabase -id "mit-eu01" | select-object ActivationPreference -ExpandProperty ActivationPreference
          [PowerShell Cmdlet]: Get-MailboxDatabase -id "mec-eu03" | select-object ActivationPreference -ExpandProperty ActivationPreference
          [PowerShell Cmdlet]: Get-MailboxDatabase -id "mec-eu01" | select-object ActivationPreference -ExpandProperty ActivationPreference
          [PowerShell Cmdlet]: Get-MailboxDatabase -id "mec-eu02" | select-object ActivationPreference -ExpandProperty ActivationPreference
          Checking dataset availability, connecting to SnapDrive...
          An error occurred when querying FlexClone status for all Exchange  storage system volumes.Exception of type 'System.OutOfMemoryException' was thrown.

           

          SnapManager FRAMSEXM10 concurrent job status at 23.02.2010 15:02:39 :
          =================================================================================================
          SnapManager is running 0 backup integrity verification jobs.
          This DeferredBackupVerification job with JobID=1029 is waiting in the queue at position 0.
          =================================================================================================

           

          There is no unverified FRP backup prior to backup [02-22-2010_22.00.13]
          pExchangeInfo != NULL

           

          DeferredBackupVerification Job of JobID=1029 starts to run on server FRAMSEXM10.

           

          DeferredBackupVerification job [1029] has report file : C:\Program Files\NetApp\SnapManager for Exchange\Report\Backup [FRAMSEXM10]\02-23-2010_15.02.24.txt.

           

          Starting verification from server...

           

          ***VERIFICATION JOB DETAILS

           

          Exchange Server: FRAMSEXM10
          Storage Groups/Databases:
              mec-eu03
          The most 1 recent snapshots will be verified.
          The verification will be run on computer FRAMSEXM10.

           

          Verification mount directory C:\mxstore\verify.
          Use drive letter if available to mount snapshot Yes.

           

          Verification throttling is not enabled or supported.
          This is an operation which will only run database verification.

           

          Backup Management Group: Standard
          Database Verification Time Stamp: 02-23-2010_15.02.24

           

          Run Command after operation: No
          Job Management is enabled : YES
          Verify backup on SnapVault secondary: No

           

          ***DATABASE VERIFICATION JOB STARTED AT: [02-23-2010_15.02.41]

           

          SnapInfo Directory located at:
          C:\mxstore\mec-eu03_log\sme_snapinfo\EXCH__FRAMSEXM10\SG__mec-eu03
          Getting unverified FRP backup prior to backup [02-22-2010_22.00.13]
          There is no unverified FRP backup prior to backup [02-22-2010_22.00.13]

           

          The destination volume of the source Logical Disk C:\mxstore\mec-eu03_db\ FlexClone State is Success and SnapMirror State is Unknown.
          Mounting Snapshot [exchsnap__framsexm10_02-22-2010_22.00.13] for LUN C:\mxstore\mec-eu03_db\ created from Computer FRAMSEXM10
          [SnapDrive Error]:VDS volume object for the LUN s/n 'C4iAWJV4J1rs' has not been found
          (SnapDrive Error Code: 0xc004030f)
          SnapDrive failed to mount the snapshot.
          [SnapDrive Error]:VDS volume object for the LUN s/n 'C4iAWJV4J1rs' has not been found

           

          Unable to mount snapshot, abort verification.

           

          RUNNING TRANSACTION LOG INTEGRITY VERIFICATION
          The SnapInfo directory is located at:
          C:\mxstore\mec-eu03_log\sme_snapinfo\EXCH__FRAMSEXM10\SG__mec-eu03\02-22-2010_22.00.13\Logs

           

          Running Integrity Verification using CheckSgFiles API

           

          LogPath: C:\mxstore\mec-eu03_log\sme_snapinfo\EXCH__FRAMSEXM10\SG__mec-eu03\02-22-2010_22.00.13\Logs
          LogBaseName: E03

           


          Operation completed successfully in 3.915 seconds.

           

          [SnapDrive Error]:VDS volume object for the LUN s/n 'C4iAWJV4J1rs' has not been found

           

          [SnapDrive Error]:VDS volume object for the LUN s/n 'C4iAWJV4J1rs' has not been found

           

          Verification failed. Error code: 0xc004030f, LUN: C:\mxstore\mec-eu03_db\
          An autosupport message is sent to the storage system of LUN [C:\mxstore\mec-eu03_db\].
          Failed to verify the storage group/database [mec-eu03] .
          [SnapDrive Error]:VDS volume object for the LUN s/n 'C4iAWJV4J1rs' has not been found

           


          ***DATABASE VERIFICATION JOB ENDED AT: [02-23-2010_15.09.49]
          [SnapDrive Error]:VDS volume object for the LUN s/n 'C4iAWJV4J1rs' has not been found

           


          ****VERIFICATION RESULT SUMMARY*****
          Verification SG/DB [mec-eu03]: Database Verification Failed
          Database verification failed.

           

          Error: 0xC004030F, VDS volume object for the LUN s/n '%1' has not been found

           


          UpdateSelectedDestinationVolumesStatus Started
          UpdateSelectedDestinationVolumesStatus Started
          UpdateSelectedDestinationVolumesStatus Started
          UpdateSelectedDestinationVolumesStatus Started
          UpdateSelectedDestinationVolumesStatus Started
          UpdateSelectedDestinationVolumesStatus Started
          UpdateSelectedDestinationVolumesStatus Started
          UpdateSelectedDestinationVolumesStatus Started
          UpdateSelectedDestinationVolumesStatus Started
          Preparing email notification message...
          An email notification message is sent.

           

          Might the missing SnapMirror-Status be the failure?

           

          Philipp

          • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
            beaupre
            Currently Being Moderated

            It might be that SnapMirror has not completed replication before you started your verification on the SnapMirror secondary.

             

            Instead of running a deferred verification, can you just enable verify on destination on your backup job? This will ensure that your verification doesn't start until the replication has completed.

             

            Also, you might want to ensure that the VDS service is running on your verification host.

             

            Thanks,
            Mark

            • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
              mrphoenix
              Currently Being Moderated

              Hi Mark,

               

              Maybe a stupid question but how can I set up the verification of the local backup copy only?

              I do the verifies from the same mailbox-server like I do the backups.

               

              Greetings,

              Philipp

              • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
                beaupre
                Currently Being Moderated

                Are you using Exchange 2010 in a DAG?

                 

                If you are using Exchange 2010 in a DAG, you will want to set up the backup and verification on one of the DAG member servers that is not running the active copy.

                 

                If you are using Exchange 2010 in a standalone configuration, the easiest way is to disable/delete the verification job you have created and then use the SME Backup Wizard to re-create the backup job. In the SME Backup wizard, you will select the exchange server as the verification server and on the verification configuration you will not select the Verify on SnapMirror destination option.

                 

                Thanks,
                Mark

                • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
                  mrphoenix
                  Currently Being Moderated

                  Hi Mark,

                   

                  I'm using a single exchange-server right now. If there would be a DAG the option to verify the Backup on the passive node would make sense, although there might me no passive node anymore. (the DAG can be used as an "Active-Active-Cluster").
                  When I'm clicking through the Backup-Wizard it states "There are no SnapMirrored Volumes available" after clicking on "Verification on Destination Volumes"-Button in the "Database Verification Settings"-Dialog.

                   

                  Philipp

                  • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
                    lwei
                    Currently Being Moderated

                    Hi Philipp,

                     

                    I'll add two things to check:

                    • In the job report you posted earlier, there was an error: "Checking dataset availability, connecting to SnapDrive...
                      An error occurred when querying FlexClone status for all Exchange  storage system volumes.Exception of type 'System.OutOfMemoryException' was thrown.
                      " I don't know if it's related but it's good to get rid of it.
                    • I'll go back to the nested mount point issue: rather than C:\mxstore\verify, try C:\mxstore_verify.

                     

                    Thanks,

                    Wei

                    • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
                      mrphoenix
                      Currently Being Moderated

                      Hi Lwei,

                       

                      I've switched to a dedicated DriveLetter already - without success :-(

                       

                      SnapManager for Exchange

                      ******VERIFICATION OVERALL JOB DESCRIPTION*******

                      Server: FRAMSEXM10
                      Verify Storage Group/Database 1: mit-eu01
                      There are 1 Database(s)

                      Backup Management Group: Standard
                      This is an operation which will only run database physical integrity verification.
                      The most 1 recent snapshots will be verified
                      The verification will be run on computer FRAMSEXM10.
                      Verification throttling is not enabled or supported.

                      Exchange Server [14.0.639.21]

                      [PowerShell Cmdlet]: get-exchangeserver -status -identity FRAMSEXM10

                      SnapManager FRAMSEXM10 concurrent job status at 23.02.2010 17:15:27 :
                      =================================================================================================
                      SnapManager is running 0 backup integrity verification jobs.
                      This DeferredBackupVerification job with JobID=1031 is waiting in the queue at position 0.
                      =================================================================================================

                      [PowerShell Cmdlet]: get-mailboxdatabase -Server FRAMSEXM10 -DomainController "framsdc02.magna.global" ; get-publicfolderdatabase -Server FRAMSEXM10 -DomainController "framsdc02.magna.global"
                      [PowerShell Cmdlet]: Get-Mailboxserver -Identity "FRAMSEXM10"
                      [PowerShell Cmdlet]: Get-MailboxDatabase -id "Mailbox Database 0653707672" | select-object ActivationPreference -ExpandProperty ActivationPreference
                      [PowerShell Cmdlet]: Get-MailboxDatabase -id "mit-eu01" | select-object ActivationPreference -ExpandProperty ActivationPreference
                      [PowerShell Cmdlet]: Get-MailboxDatabase -id "mec-eu03" | select-object ActivationPreference -ExpandProperty ActivationPreference
                      [PowerShell Cmdlet]: Get-MailboxDatabase -id "mec-eu01" | select-object ActivationPreference -ExpandProperty ActivationPreference
                      [PowerShell Cmdlet]: Get-MailboxDatabase -id "mec-eu02" | select-object ActivationPreference -ExpandProperty ActivationPreference
                      Checking dataset availability, connecting to SnapDrive...
                      An error occurred when querying FlexClone status for all Exchange  storage system volumes.Exception of type 'System.OutOfMemoryException' was thrown.
                      There is no unverified FRP backup prior to backup [02-22-2010_22.00.13]
                      pExchangeInfo != NULL

                      DeferredBackupVerification Job of JobID=1031 starts to run on server FRAMSEXM10.

                      DeferredBackupVerification job [1031] has report file : C:\Program Files\NetApp\SnapManager for Exchange\Report\Backup [FRAMSEXM10]\02-23-2010_17.15.12.txt.

                      Starting verification from server...

                      ***VERIFICATION JOB DETAILS

                      Exchange Server: FRAMSEXM10
                      Storage Groups/Databases:
                          mit-eu01
                      The most 1 recent snapshots will be verified.
                      The verification will be run on computer FRAMSEXM10.

                      Verification mount directory C:\mx-verify.
                      Use drive letter if available to mount snapshot Yes.

                      Verification throttling is not enabled or supported.
                      This is an operation which will only run database verification.

                      Backup Management Group: Standard
                      Database Verification Time Stamp: 02-23-2010_17.15.12

                      Run Command after operation: No
                      Job Management is enabled : YES
                      Verify backup on SnapVault secondary: No

                      ***DATABASE VERIFICATION JOB STARTED AT: [02-23-2010_17.15.29]

                      SnapInfo Directory located at:
                      C:\mxstore\mit-eu01_log\sme_snapinfo\EXCH__FRAMSEXM10\SG__mit-eu01
                      Getting unverified FRP backup prior to backup [02-22-2010_22.00.13]
                      There is no unverified FRP backup prior to backup [02-22-2010_22.00.13]

                      The destination volume of the source Logical Disk C:\mxstore\mit-eu01_db\ FlexClone State is Success and SnapMirror State is Unknown.
                      Mounting Snapshot [exchsnap__framsexm10_02-22-2010_22.00.13] for LUN C:\mxstore\mit-eu01_db\ created from Computer FRAMSEXM10
                      [SnapDrive Error]:VDS volume object for the LUN s/n 'C4iAWJV4QRgg' has not been found
                      (SnapDrive Error Code: 0xc004030f)
                      SnapDrive failed to mount the snapshot.
                      [SnapDrive Error]:VDS volume object for the LUN s/n 'C4iAWJV4QRgg' has not been found

                      Unable to mount snapshot, abort verification.

                      RUNNING TRANSACTION LOG INTEGRITY VERIFICATION
                      The SnapInfo directory is located at:
                      C:\mxstore\mit-eu01_log\sme_snapinfo\EXCH__FRAMSEXM10\SG__mit-eu01\02-22-2010_22.00.13\Logs

                      Running Integrity Verification using CheckSgFiles API

                      LogPath: C:\mxstore\mit-eu01_log\sme_snapinfo\EXCH__FRAMSEXM10\SG__mit-eu01\02-22-2010_22.00.13\Logs
                      LogBaseName: E04


                      Operation completed successfully in 12.199 seconds.

                      [SnapDrive Error]:VDS volume object for the LUN s/n 'C4iAWJV4QRgg' has not been found

                      [SnapDrive Error]:VDS volume object for the LUN s/n 'C4iAWJV4QRgg' has not been found

                      Verification failed. Error code: 0xc004030f, LUN: C:\mxstore\mit-eu01_db\
                      An autosupport message is sent to the storage system of LUN [C:\mxstore\mit-eu01_db\].
                      Failed to verify the storage group/database [mit-eu01] .
                      [SnapDrive Error]:VDS volume object for the LUN s/n 'C4iAWJV4QRgg' has not been found


                      ***DATABASE VERIFICATION JOB ENDED AT: [02-23-2010_17.22.38]
                      [SnapDrive Error]:VDS volume object for the LUN s/n 'C4iAWJV4QRgg' has not been found


                      ****VERIFICATION RESULT SUMMARY*****
                      Verification SG/DB [mit-eu01]: Database Verification Failed
                      Database verification failed.

                      Error: 0xC004030F, VDS volume object for the LUN s/n '%1' has not been found


                      [PowerShell Cmdlet]: get-mailboxdatabase -Server FRAMSEXM10 -DomainController "framsdc02.magna.global" ; get-publicfolderdatabase -Server FRAMSEXM10 -DomainController "framsdc02.magna.global"
                      [PowerShell Cmdlet]: Get-Mailboxserver -Identity "FRAMSEXM10"
                      [PowerShell Cmdlet]: Get-MailboxDatabase -id "Mailbox Database 0653707672" | select-object ActivationPreference -ExpandProperty ActivationPreference
                      [PowerShell Cmdlet]: Get-MailboxDatabase -id "mit-eu01" | select-object ActivationPreference -ExpandProperty ActivationPreference
                      [PowerShell Cmdlet]: Get-MailboxDatabase -id "mec-eu03" | select-object ActivationPreference -ExpandProperty ActivationPreference
                      [PowerShell Cmdlet]: Get-MailboxDatabase -id "mec-eu01" | select-object ActivationPreference -ExpandProperty ActivationPreference
                      [PowerShell Cmdlet]: Get-MailboxDatabase -id "mec-eu02" | select-object ActivationPreference -ExpandProperty ActivationPreference
                      Checking dataset availability, connecting to SnapDrive...
                      Preparing email notification message...
                      An email notification message is sent.

                       

                       

                      Greetings,

                      Philipp

                      • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
                        lwei
                        Currently Being Moderated

                        It failed to mount. Could you try to mount it manually using the SnapDrive?   -Wei

                        • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
                          mrphoenix
                          Currently Being Moderated

                          Hi Lwei,

                           

                          No I can't - so it's not a problem with SME but rather one with Snapdrive!

                           

                          -------------------------  SnapDrive Operation Start ---------------------------------
                          Disk connect operation on server - FRAMSEXM10 failed for reason
                          VDS volume object for the LUN s/n 'C4iAWJV5E/vO' has not been found
                          --------------------- The complete operation list is shown as follows -------------------

                           

                          ********************* Server Name: FRAMSEXM10*********************

                           

                          1. Checking input parameters
                          2. Checking access control
                          3. Checking policies
                          4. Turning on space reservation
                          5. Connecting to the LUN
                          6. VDS volume object for the LUN s/n 'C4iAWJV5E/vO' has not been found 
                          ------------------------------------------ Operation Done ---------------------------------------

                           

                          Greetings,

                          Philipp

                    • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
                      moez..alibhai
                      Currently Being Moderated

                      Hi,

                       

                      I saw you were having 'System.OutOfMemoryException' errors, this is a windows problem, Its a problem with VSS.

                      There is a patch for this from Microsoft (8MB approx), which resolve this problem.

                       

                       

                      Cheers

  • Re: Backup Verification Error with SME 6.0 against an Exchange 2010
    thomas.glodde
    Currently Being Moderated

    Hi folks,

     

    be sure to check SnapDrive v6.2P1:

     

    http://now.netapp.com/NOW/download/software/snapdrive_win/6.2P1/

     

    Date Posted: 12-MAR-2010
    SnapDrive 6.2P1
    Based on SnapDrive 6.2
    03/10/2009
    
    Bugs fixed in this release:
    
    
    6.2P1
    ===========
     397424 |SDW: Lun restore fails IOCTL_DISK_SET_DRIVE_LAYOUT_EX on reversed snapmirror destination
     
     382378 |stale entries in reg HKLM\SYSTEM\CurrentControlSet\Services\ontapdsm\Parameters\LUNS\<filer>\<serial#>
    
     390915 |SDW Service is dependent on the availability of VMware vCenter Server
    
     393518 |SnapDrive 6.2 fails to create RDM LUNs with ESX iSCSI when FCP license is not set on the filer
    
     393770 |SnapDrive sending an ASUP msg "This volume is not designated for thin provisioning".
    
     395057 |SMHV does not work on Japanese Windows OS
    
     397462 |Windows 2008R2 120s Volume Arrival Timeout when connecting to LUN Clone on the same host
    
     397866 |Snapshot mounts are very slow
    
     398316 |upgrade to main from sdw 6.2 gets runtime error. program: navssprv.exe
    


    Its fixed now ;-)

     

    Kind regards

    Thomas

More Like This

  • Retrieving data ...